-
48" PADDED BUNK COMPLETE WITH ANGLE BRACKETs, SLOTTED BRACKETS, BOLTS AND NUTS. -
5/4 X 6 X 48" PADDED BUNK ATTACHED WITH TWO 3/8-16 X 1 1/2" CARRIAGE BOLTS, WASHERS, HEX NUTS -
3" BOW ROLL MOUNTED IN 1/4 X 1 1/8 X 8 3/4" OFFSET SLOTTED BRACKET -
WIRING HARNESS, FRONT AND REAR -
TX-611 6 1/2" STANDARD WINCH CAP -
3/16 X 4 X 12 WINCH POST DIAGONAL L BRACE (NF) -
Must order this option when using swivel jack on SUT-220-S, SUT-250-M2, SUT-250-S and SUT-500-S. -
Swivel Front Parking Jack for SUT trailers, easy bolt on item (Packaging 34"X11"X8" 18#) When using on SUT-220-S, SUT-250-M2, SUT-250-S and SUT-500-S must also or... -
60" Front Mast Stand Includes 1500# Winch -
60" Front Mast Stand Without Winch -
48" Front Mast Stand, Includes 1500 Pound Winch. -
48" Front Mast Stand Without Winch
-
Medium Winch 1400# Capacity. (Must Order Wpwco For All Sut Trailers). (Packaging 11"X11"X8" 9#) -
1/4 X 2 X 2 L X 7 3/4' Tx-10 Tongue Splice
-
SPARE TIRE CARRIER -
DUST CAP WITH RUBBER GREASE PLUG -
3/16 X 1 3/8 X 1 5/8 L X 3 3/16" (Nf) Tongue To Crossmember
-
2000# Axle 63 1/2" Hub Face 51 3/4" S.C. With Hubs - Galvanized. -
SPRING SHACKLE HOLDER COMPLETE WITH SHACKLE, BUSHINGS, BOLTS, AND NUTS -
SPRING SHACKLE HOLDER WITH ( 2 ) 9/16 " NYLON BUSHINGS (HOLDER/BUSHINGS ONLY) -
4.80 X 12" Clr Tire On 4-Hole Galvanized Wheel Please make sure that your trailer is equipped with 12" tires before purchasing. -
Please make sure that your trailer is equipped with 8" tires before purchasing.
4.80 X 8" Tire And Galvanized Wheel, 4" Bolt Circle On 4 Hole Wheel. 590# Cap... -
Small Plastic Fender Silver Drilled.
-
SMALL PLASTIC FENDER COMPLETE WITH BOLTS, NUTS, WASHERS -
3/8 Id X 2" Od 1/8" Thick Large Neoprene Washer
-
3/8-16 x 1" BOLT
(Lock nuts sold separately 8-401NY)
-
3/16 X 1 3/8 X 1 5/8 X 2" (NF) (TX-8 STABILIZER) -
TX-8 8" NF SLOTTED BUNK BRACKET -
1/8 X 4 X 8 1/2 REAR CROSSMEMBER ANGLE PLATE 45 DEGREES (NF) -
TX-4 SUB RAIL 33" LONG, ANODIZED (LEFT & RIGHT SAME) -
TX-1112 SIDERAIL 33" (NF) -
Tx-1112 (Nf) Crossbar 51 3/4"
-
License Plate Bracket Black Plastic
-
1/4 X 2 X 6 1/2" Tail Light Bracket Nf
-
LED TAIL LIGHT (LEFT SIDE/DRIVERS SIDE)
-
LED TAIL LIGHT (RIGHT SIDE / PASSENGER SIDE)
-
LED AMBER MARKER CLEARANCE LIGHT WITH REFLECTOR, DRY LAUNCH -
TX-8 5-3/4" LENGTH for DRY LAUNCH MARKER LIGHTS 4-263C COMPLETE WITH T BOLT AND NUT. -
6" CENTER KEEL ROLL COMPLETE -
TX-10 (NF) 87" REAR TONGUE SECTION FOR SUT'S WITH 14'6" A 2 PIECE TONGUE -
Tx-10 (Nf) 87" Front Tongue Section For Sut's With A 2 piece 14'6" Tongue - Drilled For Coupler. -
1/4 X 1 1/8 X 15" SKID -
1/2" FLAT WASHER SHEARED FOR COUPLER -
Class I Safety Hitch Cable, 2800# Break Strength, 36" Oal With Black Vinyl Cover
INCLUDES:
2 SAFETY CABLES
-
1 7/8" Coupler For 2 1/2" Wide Tongue, 2000 Lb. Capacity.
-
3/8-16 x 3/4 REPAIR T-BOLTS (PACKAGE of 15) AVOID HAVING TO DISASSEMBLE YOUR TRAILER WITH THIS T-BOLT. THE 1/2 HEAD CAN BE INSERTED FROM THE MIDDLE ...
